Table of Contents
Advertisement
5-28 Installing the Operating System with Express Setup
SAN Boot/Storage and I/O Blade AD106a Boot
If you use SAN Boot/Storage and I/O Blade AD106a Boot, confirm BIOS Setup before setup
Windows.
If you use N8403-027, set following BIOS setting.
[Advanced] → [Peripheral Configuration] → [SATA AHCI] and [SATA RAID] change to
[Disabled].
If you use N8403-026, set following BIOS setting.
[Advanced] → [PCI Configuration] → Option ROM Scan [Enabled] → [Disabled]
IMPORTANT: After executing [Load Setup Defaults], set this BIOS
setting. If you do not set up BIOS setting, you could not install
Windows.
Advertisement
Table of Contents
