Displaying Pc Screen On Tv; Playing An Ipod On Tv - Panasonic TC-L26X1L Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 43)
Display the Input select menu
Select "PC"
■
To return to TV
■
PC menu setting
(change as desired)
Making settings "How to Use Menu Functions"
Menu Item
Reset to defaults Resets PC adjust
H & V:
Sync
On green: Uses a synchronized signal on the Video G signal, which is input from the G
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
Dot clock
blurred.
Adjusts the horizontal position.
H-position
Adjusts the vertical position.
V-position
PC
adjustments
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
Clock phase
Note
It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
Input
Input signal switched from 640×480 to 800×480
resolution
Input signal switched from 1024×768 to 1280×768 or 1366×768
Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency Display range
V-frequency Horizontal: 15 - 110 kHz
Vertical:
Audio menu (p. 26)
22
Input select
1 TV
Component AUX
2
HDMI 1 GAME
3
4 HDMI 2
5 HDMI 3 GAME
Video 1
6
Video 2 GAME
7
8 PC
(example: TC-L37X1)
Corresponding signals
PC
(p. 48)
Displays
PC screen
/
to (p. 26)
Adjustments/Configurations (options)
The H and V sync signals are input from the HD/VD connector. (p. 48)
connector. (p. 48)
48 - 120 Hz

Playing an iPod on TV

You can enjoy iPod music/videos/photos on your TV, and you can also charge the battery by connecting
the Universal Dock for iPod to your TV.
Set up Universal Dock for iPod
■
Controls and basic functions
Plug
Connect to the back panel of
this TV.
Indicator
This indicator lights up when
the iPod is connected.
■
Connecting the Universal Dock for iPod
Ensure that the power of this TV is switched off before you connected the Universal Dock.
Connect the plug of the Universal Dock to the Dock for iPod terminal of this TV.
Dock for iPod
D D
(DC 5V 500mA MAX)
A A
Back of the TV
Installing the ferrite core
Note
Do not connect any other optional dock. (Available included Universal Dock for iPod only)
■
Connecting your iPod
Insert your iPod into the connector's terminal of the Universal Dock.
Note
Panasonic has no warranty for iPod data management.
Do not twist your iPod when inserting it or taking it off from the universal
iPod dock, and be careful not to knock over this universal dock when your
(not included) iPod is inserted.
Do not take off your iPod from the universal dock while you play your
The indicator lights iPod with the TV.
up when the iPod It is recommended that you update your iPod software before using it
is inserted, and with the universal dock. The updater for the iPod software is available on
charging begins. the Apple website.
Attach the dock adapter (which should be supplied with your iPod) to the
dock for the stable use of the iPod. If you need an adapter, consult your
iPod dealer.
■
Disconnecting the Universal Dock for iPod
Switch off the power of the TV.
1. Switch off the iPod.
2. Pull out the plug of the Universal Dock from the Dock for iPod terminal of the TV
Dock cable
Connects the universal dock
to this TV.
iPod connector terminal
Connects your iPod.
Open
Pull back the tabs Press the cable
(in two places) through and close
23