Watching Videos And Dvds - Panasonic TC-L26X1L Operating Instructions Manual

Watching Videos and DVDs

If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV's
screen.
You can select the external equipment to access.
With the connected equipment turned On
Display the Input select menu
Select the input mode
Input select
TV
1
Component
2
3 HDMI 1
4 HDMI 2
HDMI 3
5
Video 1
6
7 Video 2
8 PC
(example: TC-L37X1L)
HDMI 1
GAME
Note
The input label will be displayed on "Input select" screen if Input label is set on p. 41.
For side input terminals (HDMI 3*/Video 2), "GAME" input label is set as default.
(Picture mode is set to "Game", refer to p. 47.)
For more details for picture mode setting, refer to p. 47. For Input label, refer to p. 41.
* HDMI 3 (TC-L37X1L, TC-L32X1L only)
Operate the connected equipment using the remote
control supplied with the equipment
■
To return to TV Note
For details, see the manual of the connected equipment.
20
Input Select
Press corresponding NUMBER
button on the remote control to
select the input of your choice.
AUX
GAME
or
Select the input of your choice,
GAME
then press OK.
select
GAME
During the selection, if no action
is taken for several seconds, the
enter
"Input select" menu disappears.
The terminal and label of the
Terminal
connected equipment are
Label
displayed.
To label each of the inputs,
please refer to p. 41.
(example)
VIERA Link
If you connect equipment that has the "HDAVI Control" function to a TV using an HDMI cable,
you will find it easier to use. Please refer to p. 30-35. Before using these functions, you need to
set "VIERA Link" setting to "On" as shown below.
Display menu
Select "Setup"
Menu
Picture
Audio
VIERA Link
SD card
Closed caption
Setup
Select "VIERA Link settings"
Setup
VIERA Link settings
ECO/energy saving
Advanced setup
About
Select "VIERA Link"
VIERA Link settings
VIERA Link On
Yes
Power on link
Yes
Power off link
Stand-by power save
No
■
Press to exit from
Auto power stand-by
a menu screen
No
Default speakers TV
■ Select "On"
Press to return
(default is On)
to the previous
screen
Now you can set each "VIERA Link" functions according to your
preference (p. 33-35).
Note
If no HDMI equipment is connected or standard HDMI equipment (non- "VIERA
Link") is used, set it to "Off".
For more details on the external equipment's connections, please refer to the
operating manuals for the equipment.
Setting
TM
select
next
select
2/2
next
select
change
21