Samsung DB32D User Manual page 114

Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to
enter when you set up security for your wireless network. If you use this method of setting up the network
connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase
during the the automatic or manual setup process.
How to set up automatically
1
Network Type Wireless
Set to from the
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button
twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
Add Network
The button appears.
Add Network
Select to add a wireless router to connect to.
4
Enter security key.
If the screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the Security Key
Security Key. The Security Key
Network Settings
page.
Refresh to search again.
Stop
button.
(Security key or PIN).
6
When done, use the right arrow button to move the cursor to Next, and then press E. The
network connection screen appears and the verification process starts.
is based on
― A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the
setup and ready to use.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
Your wireless network and Internet connection are
message appears.