System setup
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to
match the video.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
.
Press the Cursor % button to move to AV-SYNC and then press the
ENTEr or + button.
4.
Press the Cursor $, % button to select the AV-SYNC Delay Time
and then press the ENTEr button.
~
You can set the audio delay time between 0 ms and 300 ms. Set
it to the optimal status.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
.
Press the Cursor % button to move to HDMI AUDIO and then press
the ENTEr or + button.
4.
Press the Cursor $, % button to select ON or OFF and then press
the ENTEr button.
ON : Both video and audio signals are transmitted over the HDMI
~
connection cable, and audio is output through your TV
speakers only.
~
OFF : Video is transmitted over the HDMI connection cable only, and
audio is output through the home cinema speakers only.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M
`
The default setting of this function is HDMI AUDIO OFF.
`
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
MOVE
ENTEr
rETUrN
EXIT
MOVE
SELECT
rETUrN
EXIT
MOVE
ENTEr
rETUrN
EXIT
MOVE
SELECT
rETUrN
EXIT