System setup
USING THE TEST TONE
Use the Test Tone feature to check the speaker connections.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
.
Press the Cursor % button to move to TEST TONE and then press
the ENTEr or + button.
The test tone will be sent to L C r Sr SL SW in
~
order.
~
If the ENTEr button is pressed again at this time, the test tone will
stop.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE AUDIO
You can adjust the balance and level for each speaker.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
.
Press the Cursor % button to move to SOUND EDIT and then
press the ENTEr button.
4.
Press the Cursor $, % button to select and adjust the desired item.
Press the Cursor _, + button to adjust the settings.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
0
MOVE
ENTEr
rETUrN
EXIT
STOP
EXIT
MOVE
ENTEr
rETUrN
EXIT
MOVE
CHANGE
rETUrN
EXIT