Operation
Reduce speed and avoid sharp turning
G
when operating the snowmobile in re-
verse.
1.
To select the desired operating position,
pull the shift lever out, slide it to "FWD" or
to "REV" until it stops, and then push it
back in. NOTICE: Do not shift from
"FWD" to "REV" or from "REV" to
"FWD" while the snowmobile is mov-
ing, as the drive train could be dam-
aged.
[ECS00811]
1. Pull out.
2. Slide to "FWD" (forward).
3. Push in.
1. Pull out.
2. Slide to "REV" (reverse).
3. Push in.
TIP
The reverse buzzer beeps while the shift lever
is in reverse.
38
2.
Release the parking brake by moving the
parking brake lever to the right.
3.
Press the throttle lever slowly to move the
snowmobile.
4.
Turn the handlebar in the desired direc-
tion.
5.
Squeeze the brake lever to stop the
snowmobile.
6.
Apply the parking brake by moving the
parking brake lever to the left.
ESU11411
Stopping the engine
Turn the main switch to the off position to
G
stop the engine.
1. Off
Push down the engine stop switch to stop
G
the engine in an emergency.