Table 2-1. OSD functions
OSD Icon on Main
Menu
Brightness/
Contrast/DCR
Horizontal Position
Image Position
Image Setup
Image Properties
Submenu
Brightness
Adjusts overall screen brightness
Contrast
Adjusts difference between light and dark areas
DCR
•
On
•
Off
Moves image left or right.
Vertical Position
Moves image up or down.
Automatic
Optimizes image (size, position, phase and clock).
Manual
Manually optimizes image. See "Manual image
setup"on page 3-4.
•
Clock
•
Phase
Color
Adjusts intensity of red, green, and blue.
Preset mode
•
Neutral
•
sRGB
•
Reddish
•
Bluish
Custom
•
Red: Increases or decreases the saturation of
Red in the image.
•
Green: Increases or decreases the saturation of
Green in the image.
•
Blue: Increases or decreases the saturation of
Blue in the image.
Input signal
This monitor can accept video signals through two
different connectors. Most desktop computers use
a D-SUB connector. Select digital among OSD
Controls when you use DP connector.
- Selects VGA (Analog)
- Selects DP
Scaling
Selects type of scaled image.
•
Original AR:Same Aspect Ratio with input
signal.
•
Full Screen: Expand image to full screen..
Over Drive
•
Off
•
Normal
•
Extreme
Low Blue Light
•
On
•
Off
Description
Controls and
Adjustments (DP)
Same as Analog
Controls Locked -
not required for
DP input
Same as Analog
2-5
Chapter 2.