Sharp AR-5618 Operation Manual page 73

Program
Program name
number
7 Rotation copy
Auto paper select
8
*2
mode
9 Auto tray switching
10 to 15 Auditing mode
Erase width
16
adjustment
17 Layout in 2 IN 1 copy
18 Layout in 4 IN 1 copy
Image rotation in
20
duplex copying
Location of the
21
*3
margin
22 Margin width
2
* When there are two or more paper trays.
3
* When the RSPF is installed.
Setting codes
(factory default setting
appears in bold)
0: OFF
1: ON
0: OFF
1: ON
0: OFF
*2
1: ON
–
1: 0 mm (0")
2: 5 mm (1/4")
3: 10 mm (1/2")
4: 15 mm (3/4")
5: 20 mm (1")
1: Pattern 1
2: Pattern 2
1: Pattern 1
2: Pattern 2
3: Pattern 3
4: Pattern 4
0: OFF
*3
1: ON
1: Left edge
2: Top edge
1: 0 mm (0")
2: 5 mm (1/4")
3: 10 mm (1/2")
4: 15 mm (3/4")
5: 20 mm (1")
Explanation
• When the auto paper select function is
enabled and there is no paper that is the same
size as the original and loaded in the same
orientation, this function will automatically
select paper of the same size that is loaded in
the opposite orientation, and rotate the image
90 degrees so that it is copied on the paper in
the correct orientation.
• When the auto ratio select function is
operating and the original and paper are
loaded in opposite orientations, this function
rotates the image so that it is copied on the
paper in the correct orientation.
• This function automatically selects paper that
is the same size as the original placed in the
SPF/RSPF, or the same size as that selected
with the [ORIGINAL] key (
function can be disabled.
• If the paper runs out during printing and there
is paper of the same size and orientation in
another tray, this function automatically
switches to that tray (excluding the bypass
tray). The function can be disabled.
See "AUDITING MODE SETTINGS"
• Use this setting to set the width of erasure of
shadows that appear around the edges and at
the binding margin when a book or similar
original is copied.
• Use this setting to select the layout pattern
when two original pages are copied onto a
single sheet of paper (see page
layout patterns).
• Use this setting to select the layout pattern
when four original pages are copied onto a
single sheet of paper (see page
layout patterns).
• When a one-sided vertical (portrait) original is
placed in a horizontal orientation (B4 or A3
(8-1/2" x 14" or 11" x 17") size) for two-sided
copying, the top and bottom of the images on
the front and back of the paper will be opposite
to each other.
• Use this setting to switch between the margin
at the top edge and the margin at the left edge.
• Use this setting to set the margin width.
USER SETTINGS
). The
(p.75).
44 for the
6
44 for the
71