Copy Functions; Normal Copying - Sharp AR-5618 Operation Manual

Chapter 3
3

COPY FUNCTIONS

This chapter explains how to use the copy functions.

NORMAL COPYING

This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.75), enter your 3-digit account number.
Copying from the document glass
1
Open the document cover/SPF/RSPF,
and place the original.
[How to place the original]
Align the edge of the original with the original size
scale, to be centred with the centring mark (
mark
Original size scale
An original up to A3 (11" x 17") can be placed
Note
on the document glass.
Place the original face
down on the document
glass.
).
mark
Original size scale
2
Close the document cover/SPF/RSPF.
3
Press the [ORIGINAL] key (
select the original size.
● Make sure that the PAPER SIZE indicator lights up.
If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [PAPER
SELECT] key ( ) and copy from the bypass tray.
● The bypass tray must be manually selected.
● To copy on paper of a different size than the original,
select the paper with the [PAPER SELECT] key (
● If the ORIGINAL SIZE indicator is blinking, rotate the
original so that it is in the same orientation as the
blinking ORIGINAL SIZE indicator.
4
Set the number of copies.
After placing the original,
be sure to close the
document cover/SPF/
RSPF. If left open, parts
outside of the original will
be copied black, causing
excessive use of toner.
) and
When the original size is
selected, the tray with the
same size of paper is
automatically selected.
(When there are two or
more paper trays)
).
27