Table of Contents
Advertisement
Parts and their functions
Rear panel
AES/EBU
ANALOG
CH1/2
IN
AC IN
Y
CH3/4
IN
P B
CH1/2
OUT
P R
CH3/4
OUT
OPTION
Y
1
2
P B
(WFM)
3
P R
(SUPER)
SIGNAL
GND
SERVICE ONLY
=
<
> ?
< Fan
This fan is used to cool down the VTR.
If, for any reason, the fan stops, "E-10" will appear
on the counter display.
= SIGNAL GND terminal
This is connected to the signal ground terminal on
the component connected to this VTR in order to
minimize noise. It is not a safety ground.
> ANALOG COMPONENT VIDEO OUT connectors
The analog component video signals are output
through these connectors.
? ANALOG COMPOSITE VIDEO OUT connectors
The analog composite video signals are output
through these connectors.
The waveform monitor (WFM) signal can be output
from the VIDEO OUT 2 connector.
It can be selected using setup menu No. 00 (WFM
SEL).
Video signals containing superimposed information
can be output through the VIDEO OUT 3 connector.
Whether the superimposing is to be set ON or OFF
is selected using the SUPER switch 4 on the front
panel.
@ RS-232C connector
A personal computer or other component can be
connected to this connector to operate the VTR.
(continued)
REMOTE
ANALOG
VIDEO
SDI
IN
IN
OUT
REMOTE IN/OUT
PUSH
PUSH
PUSH
TC
CH1
AUDIO
CH2
ON
IN
IN
75Ω
1
OFF
REMOTE
OUT
ACTIVE
PUSH
PUSH
TC
CH3
CH4
THROUGH
OUT
REF VIDEO
2
IN
ENCODER REMOTE
ON
75Ω
3
OFF
(SUPER)
CH1
AUDIO
CH2
MON
RS-232C
OUT
L
OPTION
VIDEO
OUT
PARALLEL
MON
CH3
CH4
R
@ A
B
C
D
A PARALLEL REMOTE connector
This connector is used when the VTR is to be
operated by an external component.
B ANALOG AUDIO OUT connectors
The analog audio signals are output through these
connectors.
C MONITOR OUT connectors
During
playback,
(CH1/CH2/CH3/CH4) or playback signals from the
CUE track are output through these connectors.
<Note>
Noise may appear on the CUE signal at the instant
recording is started.
D OPTION connector
O When the SDTI board
optional accessory) is installed in this VTR, digital
data can be input and output using the SDTI
(Serial Data Transport Interface) format.
O Use of an digital video interface board (AJ-
YAD955G,
optional
input/output interfacing of the digital signals with
the IEEE1394 standard.
the
PCM
audio
signals
(AJ-YAC965E,
YAC965
accessory)
enables
19 (E)
Advertisement
Table of Contents
