Table of Contents
Advertisement
Name
You can select the adapter name here to indicate the location of the device.
Network Search Enabled
When this setting is enabled (by clicking the check box), the device will automatically detect and select the suitable
channel within the frequency range of your MoCA network. If this setting is not enabled, the device will operate on
the same channel specified in the last operating channel.
Note: If this setting is not enabled, the same channel of operation must be configured on each Stream TV MoCA
Ethernet Adapter that is connected to your MoCA network.
LOF
The Last Operating Frequency (LOF) parameter identifies the frequency (in MHz) that the Stream TV MoCA Ethernet
Adapter uses to transmit beacon for joining the MoCA network.
Tx Power
The Tx power parameter is the maximum transmit power of the Stream TV MoCA Ethernet Adapter. Each
incremental value increases the transmit power by 3dB. The following table lists the transmit power for each
setting.
Beacon Power Level
The beacon power level is the maximum power of the Stream TV MoCA Ethernet Adapter for beacon transmission
power. The value range is from 1 to 10. Each incremental value increases the beacon transmit power by 3dB. When
the Stream TV MoCA Ethernet Adapter is set up with a higher beacon power level, it may interfere with the video
devices connected to the coaxial cable. Please leave it at the default setting if you are not sure what value to use.
©2021 Verizon. All rights reserved.
value
10
9
8
7
6
dBM
2
-
-4
-7
-10
-13
1
5
4
3
2
1
0
-16
-19
-22
-25
-28
14
Advertisement
Table of Contents
