Table of Contents
Advertisement
5. HARDWARE DESCRIPTION
5.2.
PANEL MOUNTED RACKS
The racks provided separately for the installation of BUS1000 board mounted systems are standard, 19
inches wide and their dimensions are shown in figure 22.
The external connections are provided in terminal blocks mounted in the rear part of the rack.
The front cover is made up of plastic material and fits over the case making pressure over a rubber joint
located around the enclosure. This produces a tight proof sealing avoiding the entrance of dust. The
resetting of the targets is achieved without having to take off the cover, through pushbuttons.
The modules provided with the various protection functions are assembled vertically on the racks. Several
types of modules are available depending on their type of installation and extractability.
Name
BBD
Single bus differential protection (6 positions)
(figure 7.1)
BBR
Input and output modules for additional positions,
Maximum: 12 positions per rack.
BZC
latching auxiliary units for current switching
in double bus systems. Maximum: 5 positions per
BTR
Optional test rack for single or double bus systems
(figure 7.3)
BFR
Supervision and breaker failure overcurrent relay
Maximum:5 positions per rack. (figure 7.4)
BAR
Accessory functions
5-2
Description
BUS1000 Busbar Protection
Modules
3 DDF
1 DAL
1 DDI
1 DRD
3 DFI
1 DRS
6 DFI
2 DRS
10 HLB100
1 DPR
2 HLB100
2 HLA100
5 SFI
5 MFI
1 DTE
6 HLB100
GEK-98514B
Advertisement
Table of Contents
