Table of Contents
Advertisement
2.4.1.2 LAN Settings
2.4.1.2.1 LAN
The LAN IP module lets administrator modify LAN-side IP address of the router.
Steps to modify the LAN IP settings:
1. From the navigation panel, go to Advanced > Network > LAN > LAN IP.
2. IP Address: The LAN IP address of WiFi Router. The default value is 192.168.1.1. In
IP-based networks, data packets are sent to the network devices' specific IP
addresses.
3. Subnet Mask: The LAN subnet mask of WiFi Router. Its default value is
255.255.255.0
4. Click Apply.
NOTE: Any change to the LAN IP module will affect router's DHCP
settings.
43
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated