Advertisement
Vista-ll Arm Setup
NOTE: It can be operated efficiently either right or left handed.
12. Loosen the knobs of Socket Block on Vest
(Part-1).
13.Then Insert male connecting socket of Arm
(Part-3) into Socket Block of Vest (Part-1).
14. After tightening the both knobs of Socket
Block on Vest (Part-1) to secure the section.
NOTE: Adjust the 'forearm' (section nearest to Stabilizer) first, then the 'upper arm' section.
15. You can adjust the tension of Arm (Part-3)
with mounted Stabilizer, by provided knob,
according to your setup requirement.
16. Adjust the lift with Arm angled slightly up,
and the knob will turn easily. Both Arm
sections should track together.
NOTE: 17. For attaching the Stabilizer to Arm & Vest, keep the handle of Stabilizer straight in accordance
to the pin of Arm.
18. There is a 16mm mounting post and we are giving 19 and 22mm bush, so you can easily mount the
stabilizer
(Not Included)
17. Insert bush (Part-4) on arm mounting post
(Part-3)
18.Then insert into the handle of your stabilizer.
on mounting post of arm according to your requirement.
12
15
17
4
13
14
16
18
Advertisement
