Installation; Hardware And Software Requirements; Usb Driver Installation; Installation Hmgwin 3000 - HYDAC ELECTRONIC HMG 3010 User Manual

PC-Software HMGWIN 3000
2.2 Proper use
The PC software HMGWIN can be used in conjunction with the following HYDAC devices:
Portable Data Recorder HMG 3010
•
Portable Data Recorder HMG 3000
•
Portable Data Recorder HMG 510
•
The software has been developed for processing and evaluating measured data which has
been recorded using the above-mentioned HYDAC devices. We cannot accept any liability
or provide warranty outside this field of application.

3 Installation

3.1 Hardware and Software Requirements

Equipment
• PC, Pentium 400 MHz
• 256 MB RAM
• Windows XP / 2000
• CD-ROM drive
• 3 MB free hard disk space
• RS232 interface
• RS 232 connector cable
• USB 1.1
• Graphics resolution 640 x 480, 256 colours
(recommended 1024x768, 65536 colours)

3.2 USB Driver Installation

If the HMG 3010 is being connected with the PC for the first time, first, please install the
HYDAC USB driver „CP210x_VCP_Win_XX.exe".
The driver is included on the CD-ROM contained in the scope of delivery.
Select the folder containing the "Installation" file and open the folder "HMG USB driv-
•
er". Depending on the equipment, please open „Windows 2000" or „Windows
XP_S2K3_Vista_7" and select the driver file contained in it „CP210x_VCP_Win_XX.exe"
auf. Follow the instructions of the "Setup Wizard".

3.3 Installation HMGWIN 3000

Call up the file "HMGWIN 3000_V
•
the "Installation" directory and follow the instructions of the "Setup Wizard".
Status: 2012/09/20
Sidex Suministros, S.L.
_R -S
XX XX
HYDAC ELECTRONIC GMBH
Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es
.EXE" in the folder "HMGWIN 3000" in
ETUP
SIDEX
Page 6
Part No. 669847