Disassembly - Denon RCD-N8 Service Manual

DISASSEMBLY

• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the reassembling, observe "Caution concerning disassembly and assembly!".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
CAUTION:
Through great care is taken when manufacturing parts from sheet metal, there may in some rare cases be burrs on the
edges of top cover which could cause injury if fingers are moved across them. Use gloves to protect your hands.
Refer to "DISASSEMBLY
2. CD MECHA ASSY"
and "EXPLODED VIEW"
CD MECHA ASSY
(Ref. No. of EXPLODED VIEW : 10)
NETWORK PCB ASSY
Refer to "DISASSEMBLY
4. NETWORK PCB ASSY"
and "EXPLODED VIEW"
NETWORK PCB ASSY
(Ref. No. of EXPLODED VIEW : P5)
Refer to "DISASSEMBLY
2. MAIN PCB ASSY"
and "EXPLODED VIEW"
MAIN PCB ASSY
(Ref. No. of EXPLODED VIEW : P2)
Refer to "DISASSEMBLY
and "EXPLODED VIEW"
TOP COVER
(Ref. No. of EXPLODED VIEW : 21)
CD MECHA ASSY
MAIN PCB ASSY
SIDE PANEL
TOP COVER
1. TOP COVER"
Refer to "DISASSEMBLY
3. FRONT PANEL ASSY"
and "EXPLODED VIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW : 2)
Refer to "DISASSEMBLY
and "EXPLODED VIEW"
SMPS PCB ASSY
(Ref. No. of EXPLODED VIEW : P6)
14
FRONT PANEL ASSY
SMPS PCB ASSY
4. SMPS PCB ASSY"