Table of Contents
Advertisement
D, press the END key.
The CANCEL key can also be used to return to the higher screen but it must be used carefully
because it may cancel entries made so far.
To move between screens of the same hierarchical depth, first return to the higher screen and then
move to the lower screen.
4.2.3
Displaying Records
The sub-menu of "Record" is used to display fault records, event records, disturbance records and
counts such as trip count and ΣIy count.
4.2.3.1
Displaying Fault Records
To display fault records, do the following:
• Open the top "MENU" screen by pressing any keys other than the VIEW and RESET keys.
• Select "Record" to display the "Record" sub-menu.
• Select "F. record" to display the "F. record" screen.
• Select "Display" to display the dates and times of fault records stored in the relay from the top
in new-to-old sequence.
• Move the cursor to the fault record line to be displayed using the
ENTER key to display the details of the fault record.
/ 4
F . r e c o r d
0 1 / J a n / 2 0 0 2
1 8 : 1 3 : 5 7 . 0 3 1
D I F
P h a s e
P r e f a u l t
I a
/ 1
R e c o r d
• F . r e c o r d
• E . r e c o r d
• D . r e c o r d
• C o u n t e r
/ 2
F . r e c o r d
• D i s p l a y
• C l e a r
/ 3
F . r e c o r d
# 1
1 6 / J u l / 2 0 0 1
1 8 : 1 3 : 5 7 . 0 3 1
# 2
2 0 / M a y / 2 0 0 1
1 5 : 2 9 : 2 2 . 1 0 1
# 3
0 4 / F e b / 2 0 0 1
1 1 : 5 4 : 5 3 . 2 9 9
# 4
2 8 / J a n / 2 0 0 1
0 7 : 3 0 : 1 8 . 4 1 2
# 1
A B C
v a l u e s
∗ ∗ . ∗ ∗ k A
∗ ∗ ∗ . ∗ °
⎯
Date
Time
Trip element
Faulted phase
⎯
80
6 F 2 S 0 8 2 8
and
keys and press the
Advertisement
Table of Contents
