Table of Contents
Advertisement
Operation
2.
Move the remote control lever / gear
shift lever firmly and crisply forward (for
forward gear) or backward (for reverse
gear) [about 35° (a detent can felt) for re-
mote control models]. Be sure to check
that the tilt lock lever is in the lock/down
position (if equipped) before operating in
reverse.
R
NOTE:
Tiller handle models: The gear shift lever op-
36
erates only when the throttle grip is in the ful-
ly closed position.
To shift from in gear (forward/reverse) to
neutral
1.
ZMU05541
2.
N
F
ZMU05729
Close the throttle so that the engine
slows to idle speed.
After the engine is at idle speed in gear
move the remote control lever / gear
shift lever firmly and crisply into the neu-
tral position.
ZMU02030
Advertisement
Table of Contents
