Functions And Features; Automatically Identify Internet Access Mode; Obtain The Broadband Account And Password From The Old Router; Connect To Another Huawei Router - Huawei Q2 Product Description

HUAWEI WiFi Q2
Product Description

2.1 Automatically identify Internet access mode

The router can automatically identify your Internet access mode (PPPoE/DHCP). No manual
operation is required.
2.2 Obtain the broadband account and password from the
old router

2.3 Connect to another HUAWEI router

Issue 01 (2019-04-25)
2
NOTE
PPPoE, DHCP, static IP, and bridge are the most commonly used Internet access modes and are all
supported by HUAWEI WiFi Q2.
Supports obtaining broadband account and password from the old router. Manual input is
not required.
Supports the cloning of your old router's MAC address. When broadband is enabled,
some service providers will bind your broadband account to a MAC address to limit the
number of Internet devices, and only allow bound devices to access the Internet. To
resolve this issue, the MAC address cloning feature allows the main router to use the
MAC address of a bound device to access the Internet.
By pressing the H button, you can connect two HUAWEI routers that support HUAWEI
HiLink to form a network with expanded coverage.
You can also use an Ethernet cable to connect two HUAWEI routers that support
HUAWEI HiLink to form a network with expanded coverage.
The router can automatically sync to its primary router's Wi-Fi settings. If you changed
the Wi-Fi name, Wi-Fi password, or admin password on the primary router, the same
changes will be automatically synced to the secondary router. When there are multiple
routers at home, you will be automatically connected to the router with the optimal Wi-Fi
network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Functions and Features

Functions and Features
7