Mic Key Customize Function - Icom IC-7300 Information

■ MIC Key Customize function

You can change the microphone's [UP]/[DOWN] keys
function.
» SET > Function > MIC Key Customize
MENU
[UP]
[DN]
Function
--- No function
Push to increase the frequency (in 50 Hz
steps*), or Memory channel.
UP * When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
Push to decrease the frequency (in 50 Hz
steps*), or Memory channel.
DOWN * When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
Push to increase the frequency (in 1 kHz
steps*), or Memory channel.
UP
* When the Tuning Step function is ON,
(VFO: kHz)
increases the frequency in the selected
Tuning Step.
Push to decrease the frequency (in 1 kHz
steps*), or Memory channel.
DOWN
* When the Tuning Step function is ON,
(VFO: kHz)
increases the frequency in the selected
Tuning Step.
While holding down the key, the transceiver
XFC
monitors signals.
• Push to select the VFO mode and the
Memory mode.
VFO/MEMO
• Hold down for 1 second to copy a Memory
channel contents to the VFO.
In the VFO mode
• Push to increase an operating band.
BAND UP
• Hold down for 1 second to recall the Band
Stacking Register contents.
In the VFO mode
BAND • Push to decrease an operating band.
DOWN • Hold down for 1 second to recall the Band
Stacking Register contents.
Push to announce the S-meter level,
frequency, or operating mode.
L In the VFO or Memory mode, the frequency
SPEECH
and the operating mode are announced.
L S-meter level is announced only when the
S-level SPEECH function is ON.
• Push to select the operating mode.
MODE • Hold down to toggle USB and LSB, CW and
CW-R, or RTTY and RTTY-R.
(Default: UP (VFO: kHz))
(Default: DOWN (VFO: kHz))
Description Function
In the SSB, AM, or FM mode
Voice/
• Push to transmit the voice audio recorded
Keyer/
on the SD card once.
RTTY
• Hold down for 1 second to repeatedly
Memory 1
transmit the voice audio.
L If the voice audio is not saved in the Voice
Voice/
TX memory (T1 ~ T4), this function is
Keyer/
disabled.
RTTY
In the CW mode
Memory 2
• Push to transmit the Keyer memory content
once.
Voice/
• Hold down for 1 second to repeatedly
Keyer/
transmit the memory content.
RTTY
L If the Keyer memory content (M1 ~ M4) is
Memory 3
not entered, this function is disabled.
In the RTTY mode
Voice/
Push to transmit the RTTY memory content
Keyer/
once.
RTTY
L If the RTTY memory content (RT1 ~ RT4) is
Memory 4
not entered, this function is disabled.
• Push to turn the Tuning Step function ON or
OFF.
TS
• Hold down for 1 second to open the TS
screen.
• Push to sequentially call up the contents in
the Memo Pads.
MPAD
• Hold down for 1 second to save the
displayed contents into the Memo Pad.
• Push to turn the Split function ON or OFF.
SPLIT • Hold down 1 second to turn ON the Quick
Split function.
• Push to select the VFO A or VFO B.
• Hold down for 1 second to set the displayed
A/B
VFO's frequency to the VFO that is not
displayed.
• Push to turn the antenna tuner ON or OFF.
TUNER • While "TUNE" is displayed, hold down for 1
second to start manual tuning.
6
Description