Hitachi CH-Box Installation Manual page 5

● Upon receiving this product, inspect it for any shipping damage.
Inspect all electrical connections. Connections must be clean and tight at the terminals.
Claims for damage either apparent or concealed, should be filed immediately with the shipping company.
NOTE: Rough handling may dislocate internal components.
● Check the model number, electrical characteristics (power supply, voltage and frequency) and accessories
to determine if they are correct with the ordering and shipping information, to ensure the correct unit has
been shipped.
To minimize the possibility of damage after inspection, the units should be installed and reassembled as
soon as possible.
The standard installation and general use of this unit is explained in this manual.
Although common processes and procedures for installing units are presented in this manual, its use for
installation of units otherwise indicated in this manual is not recommended. Please contact your local agent,
as the occasion arises.
Our liability shall not cover defects arising from the alteration performed by a customer without our consent in
a written form.
Signal Words
● Signal words are used to identify levels of hazard seriousness.
Definitions for identifying hazard levels are provided below with their respective signal words.
DANGER
WARNING
CAUTION
NOTICE
NOTE
P5417025-rev.1
CHECKING PRODUCT RECEIVED
SAFETY SUMMARY
: DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
: WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
: CAUTION used with the safety alert symbol, indicates a hazardous situation which,
if not avoided, could result in minor or moderate injury.
: NOTICE is used to address practices not related to personal injury.
: NOTE is useful information for operation or maintenance.
iii