Device Pairing - Crestron TS-770 Product Manual

Device Pairing

Click Device Pairing to configure settings for pairing the touch screen to a CEN-ODT-C-POE. The
CEN-ODT-C-POE provides local occupancy reporting for supported room scheduling apps.
NOTE: For more information on the occupancy sensor, refer to the
Supplemental Guide (Doc.
the scheduling application, refer to
Settings Tab – Device Pairing
Device Model: Use the drop-down menu to select POE Occ Sensor.
l
Pairing Retry Time (Min): Enter a duration (in minutes) that must elapse before the CEN-
l
ODT-C-POE reattempts to pair to the touch screen.
Pairing Status: Reports whether the CEN-ODT-C-POE is paired to the touch screen
l
(Online) or not (Offline).
Device IP Address/FQDN: Enter the IP address or fully qualified domain name of the CEN-
ODT-C-POE. This is required for device pairing.
Device Authentication: Enter authentication credentials for the CEN-ODT-C-POE (if
required):
Device Username: Enter a valid username used to access the device.
o
Device Password: Enter a valid password used to access the device.
o
56 • TS-770 and TS-1070
8598). For more information on configuring the occupancy source in
Web Configuration (on
CEN-ODT-C-POE
page 36).
Product Manual — Doc. 8555D