Windows; Sas Connections - Fujitsu ETERNUS LT260 User Manual

Chapter 3 Setting the Operating System

3.3 Windows

3.3 Windows
This section provides notes on Windows settings.
3.3.1

SAS Connections

This section provides notes on using a SAS connection to connect the LT260.
(1) Install the driver.
For more details about how to obtain and install the driver, refer to the manual that is provided with each
SAS HBA.
(2) Check the devices.
Reboot the server, and then perform the following procedure to check that the devices are properly
connected:
Procedure
1
Open [Device Manager] from [Control Panel].
2
Change [View] of [Device Manager] to [Device (by Connection)].
3
Confirm that "HP UltriumX SCSI Sequential Device" (*1) or "IBM UltriumX SCSI Sequential Device"
(*2), and "Unknown Medium Changer Device" (controller) are displayed for the HBA that is
connected to the LT260.
"UltriumX" shows the drive type. For example, "Ultrium7" is displayed for LTO7 drives and "Ultrium8"
is displayed for LTO8 drives.
The "?" icon may be displayed for "HP UltriumX SCSI Sequential Device" or "IBM UltriumX SCSI
Sequential Device". In this situation, the LTO drive is not recognized due to the backup software or
the version of the backup software used. To solve this problem, reinstall the driver using the proce-
dure indicated in
*1:
*2:
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
"3.3.4 Installing a Driver" (page
Displayed if the model name of the tape drive is in the following list:
LT26ASHE, LT26ASHL (LTO-5 SAS HH drive option)
LT26AFHE, LT26AFHL (LTO-5 FC HH drive option)
Displayed if the model name of the tape drive is in the following list:
LT26BSKE, LT26BSKL (LTO-6 SAS HH drive option -I)
LT26BFKE, LT26BFKL (LTO-6 FC HH drive option -I)
LT26BSME, LT26BSML (LTO-7 SAS HH drive option -I)
LT26BFME, LT26BFML (LTO-7 FC HH drive option -I)
LT26BSNE, LT26BSNL (LTO-8 SAS HH drive option -I)
LT26BFNE, LT26BFNL (LTO-8 FC HH drive option -I)
Copyright 2019 FUJITSU LIMITED
37).
32
End of procedure
P3AM-8812-07ENZ0