Chapter 20
Configuring Network Management
Controlling External Devices
Escape sequences are one to eight characters in length. You configure escape sequences by using the
Configure Terminal Port Function (cnftermfunc) command. For example, if you have specified
"signoff" as the escape sequence in the Configure Terminal Port Function, enter the following to end
the window session:
signoff
The default escape sequence is:
^^ (SHIFT 66)
If this escape sequence does not work and you do not know the configured escape sequence, leave the
keyboard idle for four minutes. After four minutes, the system terminates the window session.
Cisco BPX 8600 Series Installation and Configuration
20-11
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001