Table of Contents
Advertisement
Menu bar (Command name)
"Operation Setting"
"Device Communication
( "Control"
Disable" (*1)
"Device Communication
Disable_Initiation" (*1)
"Device Communication
Enable" (*1)
"Out of Service"
"Error Notification"
4 "Error"
"Error History"
"Initial Setting"
"Change Password"
"Adaptor Setting"
5 "Setting"
"Unit Registration"
"Model Name Setting"
"Description Property
Setting"
"Manual"
"Interface Specification
6 "Help"
Document"
"Version Information"
*1.
About Device Communication Control Service
The ( functions "Device Communication Disable", "Device Communication Disable_Initiation" and "Device Com-
munication Enable" can be set for a Device itself. (Time Duration, Password cannot be set) This setting can be
®
set from a BACnet
Device (B-OWS, etc.) This value can be overwritten from B-OWS.
VRF System0
VRF System1
VRF System2
VRF System(
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
The following setting screen of indoor unit is
displayed.
Operation "on/off"
-
"Operation mode" switching
"Set temperature" switching
"Fan speed" switching
(Outdoor Unit cannot be set.)
Device communications is disabled.
-
* When this setting is performed, communica-
tion with the VRF System is not stopped.
The initiation of communications is disabled.
-
*When this setting is performed, communica-
tion with the VRF System is not stopped.
-
Communications is enabled.
Set Out_Of_Service properties of all BACnet
"False"
objects to "False".
-
Displays the current error information.
-
Displays the error information history.
-
-
-
Set when installing equipment.
-
Refer to par. 6. Basic Settings.
-
-
-
Instruction manual (this manual) is displayed.
-
Interface Specification Document is displayed.
-
Version information is displayed.
PC
®
(BACnet
Gateway)
52
Contents
®
BACnet
®
Device
(B-OWS, etc.)
Tool bar
D
A
B
C
-
-
-
-
-
-
-
-
-
-
-
-
Advertisement
Table of Contents
