Circuit board is not held in place with any features/adhesives and will come out easily.
Step 5 Disconnect the battery terminals
Step 6 Remove the battery from the board
The battery is adhered to the substrate with double-sided tape.
Peel the battery from the board with a wedge-shaped tool.
Step 7 Dispose of the battery properly
Used batteries should be taken to applicable collection points or given to a professional disposal company. They should never be
mixed with general household waste.
2.2.2021
The Button and Light Pipe parts will come loose from circuit board.
Cut the battery terminals where shown with diagonal pliers.
Document:
SPC-ENG-0000004-03
View Tag
Product Family
User Information Guide
CAUTION:
• HANDLE BATTERY WITH CARE - DO NOT
PUNCTURE OR DAMAGE
•
DO NOT ALLOW BATTERY TERMINALS TO BE
CONNECETED TOGETHER WITH ANY METALLIC
OBJECT AS THIS WILL CAUSE BATTERY SHORT
CIRCUIT
page
19
of
19