Table of Contents
Advertisement
Step 2 Remove the circuit board
FOR VIEW 4 ONLY: The circuit board is held in place with heat-staked posts at 7 locations. Scrape or snip
Step 3 Disconnect the battery terminals
Cut the battery terminals where shown
with diagonal pliers.
Step 4 Remove the battery from the board
The battery is adhered to the substrate with double-sided tape.
Peel the battery from the board with a wedge-shaped tool.
Step 5 Dispose of the battery properly
Used batteries should be taken to applicable collection points or given to a professional disposal company. They should never be
mixed with general household waste.
2.2.2021
these off to release the board.
Document:
SPC-ENG-0000004-03
View Tag
Product Family
User Information Guide
CAUTION:
• HANDLE BATTERY WITH CARE - DO NOT
PUNCTURE OR DAMAGE
•
DO NOT ALLOW BATTERY TERMINALS TO BE
CONNECETED TOGETHER WITH ANY METALLIC
OBJECT AS THIS WILL CAUSE BATTERY SHORT
CIRCUIT
page
17
of
19
Advertisement
Table of Contents
