Troubleshooting - Fakir ExeCute 2 Blade User Manual

EN
Cleaning the Attachments with Brush
After removing the pieces attached to the device, you can clean the attachments and the
appliance with a brush.
• You can clean the hair remaining after cutting with the help of a cleaning brush.
Cleaning the Body of the Appliance
Clean the body with a brush. Clean it with a damp cloth and, then, dry it.
Lubricating Blades
• Before lubricating, make sure that your appliance is turned off.
• Remove the adjustable comb and cutting unit.
• After cleaning the hair left on the appliance and the blades with the help of a cleaning brush,
lubricate the blades with the maintenance oil, which is supplied with the accessories, using
1-2 drops. Make sure that the blades are covered with oil by operating the appliance.
• Wipe the excess oil with a cloth.
• Use only non-acidic oil to lubricate the blades.
NOTE!
Before calling the customer services, check if you can fix the problem/error by yourself.
For this purpose, please see the "TROUBLESHOOTING" section. If you cannot solve the
problem/error, please call the customer services. Before calling please make ready the
model name and product serial number. You can find this information on the TYPE LABEL
of your product. Hotline: (+90 212) 444 0 241

Troubleshooting

Your appliance is processed via Quality Control against any malfunction.
Fault
Appliance Does
Not Operate
Possible Cause
Appliance may need charging
Appliance is not turned on
There is no power in the socket
USB cable is damaged
Solution
Charge the appliance.
Turn on the appliance
Try another outlet
Take the appliance to a
service
36