Advertisement
WORKING CONDITIONS
LABEL REWINDER:
- When the printer forwards the media for printing, the tension arm goes down, the device rewinds
the media. Yellow or green led on depending on the selected rewinding mode (face-in or face-out).
- When the tension arm is in the middle position, the device is idle. Both yellow and green leds on.
- When the printer backwards the media, the tension arm goes up, the device unwinds it. Yellow or
green led on depending on the selected rewinding mode (face-in or face-out).
LABEL UNWINDER:
- When the printer forwards the media for printing, the tension arm goes up, the device unwinds
the media. Yellow or green led on depending on the selected rewinding mode (face-in or face-out).
- When the tension arm is in the middle position, the device is idle. Both yellow and green leds on.
- When the printer backwards the media, the tension arm goes down, the device rewinds it. Yellow
or green led on depending on the selected rewinding mode (face-in or face-out).
When the unit is operating but the media is not loaded or it runs out, the tension arm reaches the
lowest position and after few seconds the unit will stop by itself, both leds blink and it beeps.
CONTROL PANEL
ON-OFF
Push this button to turn On or Off the unit.
INCREASE SPEED
Push this button to increase the rotation speed.
DECREASE SPEED
Push this button to decrease the rotation speed.
LABEL FACE-OUT
Turn the unit off. Keep pushed "FACE OUT" button, push
and release "ON-OFF" button while the green led turns on
and off. The unit is now ready to operate.
LABEL FACE-IN
Turn the unit off. Keep pushed "FACE IN" button, push and
release "ON-OFF" button while the yellow led turns on and
off. The unit is now ready to operate.
Advertisement
