Advertisement
APPLICATIONS
The label rewinder and unwinder specifically designed for Epson C831 color label printer can
handle rolls up to 240mm (8.66") media wide and having an outside diameter up to 250mm (10").
Unit is equipped with a fixed 3" core holder.
POWER SUPPLY
An external power supply 100/240VAC - 2.5A at 24V
through the tension arm, the speed and sense of rotation auto adjustment.
INSTALLATION
allows an electronic circuit to provide,
STEP 1
Connect together both plates and lean
theprinter.
Attach the printer plate to the unwinder. DDo
not tighten the knobs until the unwinder will be
properly aligned to the printer.
STEP 2
Place carefully the printer into the lock guides.
STEP 3
Load both roll of media and outer disk onto the
core holder.
Tighten the core through the knob.
Advertisement
