HIKVISION DS-KH8520-WTE1 Configuration Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Intercom System
  5. DS-KH8520-WTE1
  6. Configuration manual

HIKVISION DS-KH8520-WTE1 Configuration Manual

Video intercom indoor station
Hide thumbs Also See for DS-KH8520-WTE1:
Table of Contents

Advertisement

Quick Links

Video Intercom Indoor Station
Configuration Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-KH8520-WTE1 and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-KH8520-WTE1

Summary of Contents for HIKVISION DS-KH8520-WTE1

  • Page 1 Video Intercom Indoor Station Configuration Guide...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 Video Intercom Indoor Station Configuration Guide CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY...
  • Page 4 Video Intercom Indoor Station Configuration Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not Caution avoided, could result in equipment damage, data loss,...
  • Page 5 Video Intercom Indoor Station Configuration Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 Video Intercom Indoor Station Configuration Guide EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the...
  • Page 7 Video Intercom Indoor Station Configuration Guide l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.

  • Page 8: Table Of Contents

    Video Intercom Indoor Station Configuration Guide Contents 1 About this Manual ..................1 2 Local Operation ..................2 2.1 Activate Indoor Station ..................2 2.2 Quick Operation ....................3 2.3 Configuration Settings ..................6 2.3.1 Set Indoor Station Network Parameters ........... 6 2.3.2 Set Linked Device IP ..................
  • Page 9 Video Intercom Indoor Station Configuration Guide 2.11 Output Settings ..................... 19 3 Remote Operation via the client software ..........21 3.1 Activate Device Remotely ................21 3.2 Device Management ..................21 3.2.1 Add Video Intercom Devices ..............22 3.2.2 Modify Network Information ..............24 3.3 System Configuration ..................

  • Page 10: About This Manual

    Video Intercom Indoor Station Configuration Guide 1 About this Manual Get the manual and related software from or the official website (http:// www.hikvision.com). Product Model DS-KH8520-WTE1/DS-KH6320- Network Indoor Station WTE1/DS-KH6320-TE1/DS-KH6320- WTE2/DS-KH8350-TE1/DS-KH8350- WTE1 Scan the QR code to get the Scan the QR code to get the operation configuration guide for detailed guide for detailed information.

  • Page 11: Local Operation

    Video Intercom Indoor Station Configuration Guide 2 Local Operation 2.1 Activate Indoor Station You can configure and operate the indoor station after creating a password for the device activation. Steps 1. Power on the device. It will enter the activation page. Figure 2-1 Activation Page 2.

  • Page 12: Quick Operation

    Video Intercom Indoor Station Configuration Guide recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 2.2 Quick Operation After device activation, the wizard page will pop up. Steps 1.
  • Page 13 Video Intercom Indoor Station Configuration Guide Figure 2-3 Network Parameters 3. Configure the Hik-Connect service settings. 1) Enable Hik-Connect service. 2) Set LBS Server. 3) Set Verification Code. 4) Tap Next. 4. Configure the indoor station. 1) Choose Indoor Station Type. 2) Set SIP Password.
  • Page 14 Video Intercom Indoor Station Configuration Guide Figure 2-4 Indoor Station Settings 5. Link related devices and tap Next. If the device and the indoor station are in the same LAN, the device will be displayed in the list. Tap the device or enter the serial No.

  • Page 15: Configuration Settings

    Video Intercom Indoor Station Configuration Guide 4) Optional: Enable Synchronize Language to synchronize the language of door station with indoor station. 5) Tap OK to save the settings. 6. Tap Finish to save the settings. 2.3 Configuration Settings Configuration settings is required before starting using the indoor station. It is necessary to set the indoor station network, room No., linked devices, device time display, and so on.

  • Page 16: Set Linked Device Ip

    Video Intercom Indoor Station Configuration Guide 3. Set the network parameters. Enable DHCP, and the system can assign an IP address of the indoor station automatically. Disable the DHCP function, and set the IP address manually. You should set the device IP address, the gateway, the DNS address. 2.3.2 Set Linked Device IP Linked network parameters refers to the network parameters of devices (like door station, doorphone, main station, center, etc.), to which the indoor station is linked.

  • Page 17: Set Indoor Station No

    Video Intercom Indoor Station Configuration Guide Figure 2-7 Device Information Restore the door station via indoor station. to restore the parameters of the door station. Modify the IP address of the linked door station. to edit the IP address of door station. 5.

  • Page 18: Sip Settings

    Video Intercom Indoor Station Configuration Guide Figure 2-8 Set Indoor Station Information 3. Select Indoor Station Type from Indoor Station or Indoor Extension according to your actual needs. Indoor Station: You can set the indoor station's room information, including the room name, community No., building No., Unit No., floor, and room No., the live view duration, the SIP register password, the SIP parameters, password and E-mail address.

  • Page 19: Add Camera

    Video Intercom Indoor Station Configuration Guide 1) Enable Enable Standard SIP. 2) Tap VOIP Account Settings and configure the account information, including the user name, the phone number, the registered user name, the password, the domain, the port No., and the expiration date. Note Up to 32 characters are allowed in the user name.
  • Page 20 Video Intercom Indoor Station Configuration Guide Figure 2-9 Zone Settings 2. Press a zone to pop up the zone editing dialogue box. 3. Set the zone type, alarm type, status of arming status, entering delay, and exiting delay. 4. Tap OK to save the settings. Note •...

  • Page 21: Password Settings

    Video Intercom Indoor Station Configuration Guide Before You Start Tap Settings → → Shortcut Settings to enable Alarm. Steps Note On the home page, the arming status function and zone settings function are hidden by default. You should enable the alarm function first. 1.

  • Page 22: Modify Unlock/Duress Code

    Video Intercom Indoor Station Configuration Guide 2.4.1 Modify Unlock/Duress Code You can create and edit the duress code, unlock password and scene password of the indoor station. Steps 1. Tap Settings → → Configuration , and enter admin (activation) password. 2.

  • Page 23: Synchronize Time

    Video Intercom Indoor Station Configuration Guide 4. Open the E-mail to get the verification code. 5. Tap Next, and enter the verification code from the E-mail. 6. Tap Next, and create the new password. Note The new password is used for admin login, remote SDK login, SSH login, and Web login.

  • Page 24: Sound Settings

    Video Intercom Indoor Station Configuration Guide 2.6 Sound Settings Set the ringtone sound, the volume, and the auto answer. 2.6.1 Call Settings You can set the ringtone, ring duration, call forwarding time on call settings page. Steps 1. Tap Settings → to enter the call settings page.

  • Page 25: Volume Settings

    Video Intercom Indoor Station Configuration Guide You can set the Do Not Disturb function. Do Not Disturb Device Select All and all devices will not disturb this device. Select Indoor Station and all indoor station will not disturb this device. Do Not Disturb Set the do not disturb schedule.

  • Page 26: Restore Indoor Station

    Video Intercom Indoor Station Configuration Guide Note • Scan the left QR code on the screen to access Hik-Connect. • • Scan the right QR code on the screen to add the device to the mobile client. 2.8 Restore Indoor Station Steps 1.
  • Page 27 Video Intercom Indoor Station Configuration Guide You can set the displayed time and date format, current time. You can also tap Sync Time and enable NTP to synchronize the device time. Note • Make sure your device is connected with the network or the NTP function will not available.

  • Page 28: Device Information

    Video Intercom Indoor Station Configuration Guide Unbound EZVIZ Account Unlink the Hik-Connect account from the platform. Wizard Tap Wizard and set the language, network, indoor station type, device No., and select a device according to the wizard. Tap Settings → to enter the preference page.
  • Page 29 Video Intercom Indoor Station Configuration Guide You can set and control the connected output devices via the output settings page. You can change the relay' name, and open duration. You can also set to display the relay button on the main page or not. Steps 1.

  • Page 30: Remote Operation Via The Client Software

    Video Intercom Indoor Station Configuration Guide 3 Remote Operation via the client software The Video Intercom module provides remote control and configuration on video intercom products via the iVMS-4200 client software. 3.1 Activate Device Remotely You can only configure and operate the indoor station after creating a password for the device activation.

  • Page 31: Add Video Intercom Devices

    Video Intercom Indoor Station Configuration Guide Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management. 3.2.1 Add Video Intercom Devices Steps Note...
  • Page 32 Video Intercom Indoor Station Configuration Guide Figure 3-1 Add the Device 4. Optional: Click Online Device, the active online devices in the same local subnet with the client software will be displayed on the Online Device area. Note To add online devices to the software, you are required to change the device IP address to the same subnet with your computer first.

  • Page 33: Modify Network Information

    Video Intercom Indoor Station Configuration Guide Edit a name for the device as you want. Address Input the device's IP address. The IP address of the device is obtained automatically in this adding mode. Port Input the device port No. The default value is 8000. User Name Input the device user name.

  • Page 34: System Configuration

    Video Intercom Indoor Station Configuration Guide 3.3 System Configuration You can configure the video intercom parameters accordingly. Steps 1. Click Maintenance and Management → System Configuration → ACS & Video Intercom to enter the system configuration page. 2. Enter the required information. Ringtone Click ...
  • Page 35 Video Intercom Indoor Station Configuration Guide Device Information Click Device Information to enter device basic information page. You can view basic information (the device type, and serial No.), and version information of the device. Figure 3-2 Device Information General Click General to enter device general parameters settings page. You can view and edit the device name and device ID, and select overwrite record file.
  • Page 36 Video Intercom Indoor Station Configuration Guide Figure 3-4 Time Settings Page Select Time Zone, Enable NTP, Enable DST, or SDK Synchronization. Click Save to save the time settings. • Time Zone: Select a time zone from the drop-down list menu. •...
  • Page 37 Video Intercom Indoor Station Configuration Guide Figure 3-5 System Maintenance • Reboot: Click Reboot and the system reboot dialog box pops up. Click Yes to reboot the system. • Restore Default Settings: Click Restore Default Settings to restore the default parameters. All default settings, excluding network parameters, will be restored.
  • Page 38 Video Intercom Indoor Station Configuration Guide • Remote Upgrade: Click ... to select the upgrade file and click Upgrade to remote upgrade the device. The process of remote upgrade will be displayed in the process bar. • Language: Select a language, and click Save to change the device system language.
  • Page 39 Video Intercom Indoor Station Configuration Guide Note • The new password and confirm password should be identical. • After editing the password of device, click refresh button from the device list, the added device will not be there. You should add the device again with new password to operate the remote configuration.

  • Page 40: Video Intercom

    Video Intercom Indoor Station Configuration Guide Figure 3-8 Security 3.4.2 Video Intercom Click Video Intercom on the remote configuration page to enter the video intercom parameters settings: Time Parameters, Password, Zone Configuration, IP Camera Information, Volume Input and Output Configuration, Ring, Arming Information, Calling Linkage, Relay, and SIP No.
  • Page 41 Video Intercom Indoor Station Configuration Guide 3. Click Save. Note • Calling duration is the maximum duration of indoor station when it is called without being received. The range of maximum ring duration varies from 30s to 60s. • Live view duration is the maximum time of playing live view of the indoor station.
  • Page 42 Video Intercom Indoor Station Configuration Guide Figure 3-11 Zone Alarm 2. Select Area No. 3. Select Zone Type from the drop-down list. 4. Select Alarm Type from the drop-down list. 5. Set the NO/NC status. 6. Set Entering Delay and Exiting Delay. 7.
  • Page 43 Video Intercom Indoor Station Configuration Guide • When the zone type is set to be 24H Alarm, the indoor station will receive alarm message when the detector is triggered no matter it is under arming mode or disarming mode. • When the zone type is set to be Delay Alarm, only under arming mode, the indoor station will receive alarm message when the detector is triggered.
  • Page 44 Video Intercom Indoor Station Configuration Guide Export and Import Added Device Information Steps 1. Click Export to export the added device information file. 2. Edit parameters of added devices in batch in the exported file. 3. Click Import to pop up importing box, and open the edited added device information file.
  • Page 45 Video Intercom Indoor Station Configuration Guide Figure 3-14 Volume Input or Output 2. Slide the slider to adjust the input volume, output volume and speak volume. 3. Click Save to enable the settings. Ring Import Steps 1. Click Ring Import to enter the ring configuration page. Figure 3-15 Ring Import 2.
  • Page 46 Video Intercom Indoor Station Configuration Guide Click Arming Information to enter the configuring arming informaton page and view the arming information. Figure 3-16 Arming Information Click Refresh to refresh the arming information. Calling Linkage Steps 1. Click Calling Linkage to enter the set the calling linkage page. Figure 3-17 Calling Linkage 2.
  • Page 47 Video Intercom Indoor Station Configuration Guide Steps 1. Click Extension Settings to enter the extension settings page. Figure 3-18 Extension Settings 2. Click Add. Figure 3-19 Add SIP Info...

  • Page 48: Network

    Video Intercom Indoor Station Configuration Guide 3. Select Device Type as Indoor Extension. 4. Enter the required information. Serial No. Enter the device's serial No.. The serial No. is on the rear panel of the device (A fixed-length number with 9 digits). IP Address Enter the device's IP address.
  • Page 49 Video Intercom Indoor Station Configuration Guide Figure 3-20 Local Network Configuration 2. Enter the local IP address, IP address subnet mask, gateway, port No. and HTTP port No.. 3. Click Save to enable the settings. Note • The default port No. is 8000. •...
  • Page 50 Video Intercom Indoor Station Configuration Guide Figure 3-21 SIP Server Configuration 2. Click Enable. 3. Set the parameters according to your needs. Note • Up to 32 characters are allowed in the Register User Name field. • Registration password should be 1 to 16 characters in length. •...
  • Page 51 Video Intercom Indoor Station Configuration Guide Figure 3-22 DNS Settings Configure Mobile Client Connection Configure Hik-Connect server parameters before viewing videos via mobile client. Before You Start Make sure the indoor station connects to the network. Steps 1. Click Hik-Connect to enter the configuring the Hik-Connect settings page. 2.

  • Page 52: Person Management

    Video Intercom Indoor Station Configuration Guide Figure 3-23 Group Network Settings Device Number Settings Select the device type from the drop-down list, and set the corresponding information. Note • Device type can be set as indoor station or indoor extension. •...

  • Page 53: Organization Management

    Video Intercom Indoor Station Configuration Guide Figure 3-24 Personal Management Application The page is divided into two parts: Organization Management and Person Management. Organization Management You can add, edit, or delete the organization as desired. Person Management After adding the organization, you can add the person to the organization and issue card to persons for further management.

  • Page 54: Person Management

    Video Intercom Indoor Station Configuration Guide Note Up to 10 levels of organizations can be created. Modify and Delete Organization You can select the added organization and click to modify its name. You can select an organization, and click X button to delete it. Note •...
  • Page 55 Video Intercom Indoor Station Configuration Guide 2) Optional: Click Add Face to upload the photo. Note The picture should be in *.jpg format. Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person's photo with the PC camera.
  • Page 56 Video Intercom Indoor Station Configuration Guide 4) Click OK to start exporting. 2. Importing Person: You can import the Excel file with persons information in batch from the local PC. 1) Click Import Person. 2) You can click Download Template for Importing Person to download the template first.
  • Page 57 Video Intercom Indoor Station Configuration Guide Select the person and click Edit to open the editing person dialog. To delete the person, select a person and click Delete to delete it. Note If a card is issued to the current person, the linkage will be invalid after the person is deleted.

  • Page 58: Communication Matrix And Device Command

    A. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure A-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands.
  • Page 59 UD22939B...

This manual is also suitable for:

Ds-kh6320-wte1Ds-kh6320-te1Ds-kh6320-wte2Ds-kh8350-te1Ds-kh8350-wte1

Table of Contents

Save PDF