Canon VB-C60 Operation Manual page 150

Log Message List
●B101 Abnormal request received [notice]
Message
%1
%2
Explanation
●B102 Client connection rejected [notice]
Message
%1
%2
Explanation
Countermeasure
●B103 Client forcibly disconnected [notice]
Message
%1
%2
Explanation
●B301 Transmission audio device error [err]
Message
%1
%2
Explanation
Countermeasure
●B401 Audio device initialization failed [crit]
Message
%1
Explanation
Countermeasure
●B402 Audio Server initialization failed [crit]
Message
%1
Explanation
Countermeasure
●B403 Setting change failed [crit]
Message
%1
Explanation
Countermeasure
5-10
%1 unusual request [%2]
Client host IP address
Error type (400 | 404 | ...)
A request was rejected due to a command error (400) or parameter error (404).
%1 request denied [%2]
Client host IP address
Rejection type (41 | 43 | ...)
A client connection was rejected due to an authentication error (41), resource shortage (43),
specification of an unsupported codec (45), specification of an unsupported stream (46), restriction
on the number of clients (49), operation mode (4a).
41: Check the user name, password, or user list. 43: Reconnect or reboot the camera. 45-46: Use
supported client software. 49: Check the setting of the number of clients. 4a: Check that use of the
Audio Server is allowed.
%1 access denied [%2]
Client host IP address
Rejection type (41 | 43 | ...)
Although connection was allowed at the start of the session, the settings have been changed to
ban the client access and the client has been forcibly disconnected from the Audio Server (the
rejection types are the same as B102).
cannot use audio device for tx [%1 : %2]
Error process (ld | buff)
Error number
An audio device error was detected.
Reboot the camera. If the problem persists, ask for service.
audio device initialization error [%1]
Error number
The Audio device initialization failed. The Audio Server will stop.
Reboot the camera. If the problem persists, it is an Audio Device failure. Ask for service.
wvaudio initialization error [%1]
Error number
The Audio Server initialization failed. The Audio Server will stop.
Reboot the camera. If the problem persists, it is an Audio Server failure. Ask for service.
cannot set config [%1]
Error number
Update of the setting values failed. The Audio Server will stop.
Reboot the camera. If the problem persists, it is an Audio Server failure. Ask for service.