Canon VB-C60 Operation Manual page 148

Log Message List
■ Application Messages (Uploader)
●A004 Uploader start and stop [info]
Message
%1
Explanation
●A120 Upload destination name resolution failed [notice]
Message
Explanation
●A121 Upload destination connection failed [notice]
Message
Explanation
●A122 Upload destination connection failed [notice]
Message
Explanation
●A130 Buffer recovery of stream for recording [notice]
Message
Explanation
●A134 Invalid upload setting value (FTP/HTTP mode) [notice]
Message
Explanation
●A135 Invalid upload setting value (PORT/PASV mode for FTP) [notice]
Message
Explanation
●A136 Invalid upload setting value (HTTP notice only/image mode) [notice]
Message
Explanation
●A137 Invalid upload setting value (e-mail notification) [notice]
Message
Explanation
●A138 Invalid upload setting value (e-mail notification authentication method) [notice]
Message
Explanation
5-8
%1 uploader (A004)
Start (starting) or stop (stopping)
The uploader has started or stopped.
uploader cannot resolve the server name (A120)
Name resolution of the upload destination failed.
uploader cannot connect the server (A121)
connect () to the upload destination failed.
uploader cannot connect the server (A122)
Connection to the upload destination failed due to a cause other than A120 and A121.
stream buffer recovered - lost=<number of the lost frames> (A130)
Image buffering for stream for recording was recovered.
ftp/http mode invalid. uploader set <none> forcibly(A134)
The setting value of the upload method was invalid. "none" (do not upload) was set forcibly.
ftp port/pasv mode invalid. uploader set <pasv> forcibly(A135)
The setting value of the PORT/PASV mode for FTP upload was invalid. "PASV mode" was set
forcibly.
http notice/image mode invalid. uploader set <image> forcibly(A136)
The setting value of notice only/image mode for HTTP upload was invalid. "Image mode" was set
forcibly.
smtp mode invalid. uploader set <none> forcibly(A137)
The setting value of e-mail notification was invalid. "none" (do not send e-mail notification) was set
forcibly.
authentication mode invalid. uploader set <smtp auth> forcibly(A138)
The setting value of the e-mail notification authentication method was invalid. "SMTP_AUTH" was
set forcibly.