Input Source Selection ( Component, Rgb Scart 21-Pin ) - Canon LV-S3 Owner's Manual

Input Source Selection ( Component, RGB Scart 21-pin )

Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Press MENU button to display the On-Screen Menu. Press
Point 7 8 button to move the red frame pointer to INPUT Menu
icon.
2 Press Point d button to move the red arrow pointer to
Computer and then press SET button. The Source Select Menu
will appear.
3 Move the pointer to the source that you want to select and then
press SET button.
When the input source is coming from video
Component
equipment
/COMPONENT IN terminal with a Component-VGA
Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment
/COMPONENT IN terminal with a Scart-VGA Cable,
select RGB (Scart).
Note :
Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page
51 for order.
connected to the RGB
connected to the RGB
INPUT button
Computer
Input Menu icon
INPUT MENU
IN
IN
Source Select Menu
Move the pointer to
Component or RGB ( Scart )
and press the SET button.
Video input
Video
Move the pointer (red
arrow) to Computer and
press SET button.
31