Positioning The Projector; Adjustable Feet - Canon LV-S3 Owner's Manual

Positioning the Projector

– This projector is designed to project on a flat projection surface.
– The projector can be focused from 4.3'(1.3m) to 21.3'(6.5m).
– Refer to the figure below to adjust a screen size.
A : B = 9 : 1
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (min)
Zoom (max)

Adjustable Feet

Picture tilt and projection angle can be adjusted by rotating the
adjustable feet. Projection angle can be adjusted at 8.0 degrees.
1 Lift the front of the projector and pull the feet lock latches on
the both sides of the projector.
2 Release the feet lock latches to lock the adjustable feet and
rotate them to adjust position and tilt.
3 To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by Menu Operation. (
CAUTION
Tilt the projector within the adjustable angle not to shorten the lamp life.
Proper angle should be taken.
16.1' (4.9m)
10.6' (3.2m)
4.3' (1.3m)
40"
34"
34" 40"
691 x 518 813 x 610
4.3' (1.3m)
4.9' (1.5m)
4.3' (1.3m)
–––––
P20 and P36 )
Note:
The brightness in a room has a great influence on picture
quality. It is recommended to limit ambient lighting in order
to provide the best image.
21.3' (6.5m)
150"
100"
127"
83"
100" 150"
2032 x 1524 3048 x 2286
12.5' (3.8m) 19.0' (5.8m)
10.6' (3.2m)
16.1' (4.9m)
Adjustable Feet
Preparation
200"
Max. Zoom
169"
A
Min. Zoom
Center
B
200"
4064 x 3048
–––––
21.3' (6.5m)
Feet
Latches
Lock
13