Table of Contents
Advertisement
INSTALLATION
Make sure case is level:
Front to Back: +/- 1.5mm
Side to Side: +/- 1.5mm
NOTE:
toothing of the doors and other misalignments.
Front support feet help with the added weight of the door assembly, ensure these are adjusted
correctly.
PAGE 15
Example of a 2500mm case - The amount of legs will defer on a
each size case.
If feet are not adjusted and levelled correctly. The case chassis could twist causing saw
Make sure all feet are adjusted, NOT just the ones at the end of the
case, ensuring case load is fully supported.
SMED SEMI VERTICAL - HUSSMANN
FIGURE 3E
Exaggerated Twist
FIGURE 3F
Advertisement
Table of Contents
