Click The [Camerawindow] Icon Registered In The Dock; Working With; Remote Shooting; Single-Frame Shooting - Canon EOS 10D Instruction Manual

Remote Shooting

Single-frame Shooting

You can take shots by remote controlling your camera from a computer.
Connect the camera to the computer
1

Click the [CameraWindow] icon registered in the Dock.

2
The CameraWindow starts up.
When the ImageBrowser is running, click
the [Canon Camera] button to start
[CameraWindow].
Select the [Remote shooting] tab and then click the [Starts
3
Remote Shooting] button.
The [Choose a Folder] dialog box appears.
Select the destination folder to which images will be saved and
4
click the [Open] button.
The ImageBrowser and EOS Capture start and the EOS Capture main window
appears.
5
.
(p.1-2)
6
Specify desired settings.
Allows you to specify and
check the camera settings.
(p.3-3).
Click to show/hide the
white balance adjustment
dialog box.
The above window shows information displayable when the EOS 5D is connected.
The displayed information varies depending on the camera model connected.
Click the [Shoot] button.
The shot image is saved in the specified folder and is displayed in the ImageBrowser.
Alternatively, you can press the camera's shutter button to take the shot.
To quit the EOS Capture, select the [EOS Capture] menu
If the camera is not ready for shooting (the lens is not attached, etc.), you cannot
perform the operation as explained.
When you are using auto focus, you cannot take shots if the camera cannot focus. In
this case, focus manually.
Bulb exposure is not available.
Alternatively, you can press the space bar to shoot.
The number of available shots changes depending on the available capacity on your
computer's hard disk (p.3-3).
The time to transfer a RAW image shot with EOS Capture to your computer is
approximately 4 to 7 seconds.
• The above time is only an estimate. Transfer times vary widely depending on the
camera model used, the type of computer, and the subject of the photo.
• Transfer times are based on Canon testing standards.
(When using the following: OS: Mac OS X 10.3, CPU: 1.6 GHz PowerPC G5; RAM
512MB)
• The times for images shot in JPEG will be shorter than those shown above.
Cover/Table of
Contents
Introduction
You can rotate and download
the shot images regardless of
the camera position. Each time
you click the button, the image
rotates 90°.
* When using the rotate
function, enable the rotate
Downloading Images 1
function in the [Save
from the Camera,
settings] dialog box (p.3-4).
and Camera Settings
[Shoot] button
Click the [Shoot] button to take
a shot.
2

Working with

You can adjust the white
balance (p.3-4).
Images in the
Displays the status.
ImageBrowser
3
Remote Shooting in
the EOS Capture
[Quit EOS Capture].
Setting the EOS 5D 4
and EOS-1D Series
Cameras
5
Troubleshooting
and Uninstalling
the Software
Index
3-2