Chapter 2
2.1 Wiring the terminal block
Suitable wire
Wiring method
P r o c e d u r e
N o t e
FP7 Analog Output Unit User's Manual
Size
Cross-sectional area [mm
AWG22–14
0.3–2.0
Remove the terminal block to facilitate wiring.
1. Push down release lever
2. Pull off terminal block
Q Terminal block release lever
W Bottom of unit
E Lock button
To reattach the terminal block, insert it all the way to its original
position and press the lock button on the bottom of the unit. Then
confirm that the terminal block is securely attached and cannot be
removed.
2
]
Tightening torque [Nm]
0.5–0.6
Wiring
Wiring
13