Cambridge Audio Azur 540R V3 Technical Specifications

Azur 540R V3 HDMI AV Receiver
Cambridge Audio is proud to announce the latest version
of its mid range 540R receiver. The 540Rv3 boasts HDMI
connectivity, with 2 inputs and 1 output, which can switch
any signal up to and including HDMI 1.3 and 1080p video
All the 540Rv3's audio and video inputs are fully
assignable for ease of use. Added to this, is the ability to
control the unit over RS232, or by an IR input socket on
the rear panel, making this unit ideally suited for Custom
install use. The 540Rv3 offers the same high quality audio
performance that users have come to expect from
Azur 540Rv3 Features
Power Output:
Tuner Section:
Analogue Connections:
Digital Connections:
Video Connections
Architecture:
Frequency Response:
Crosstalk:
THD(unweighted):
Max. Power Consumption:
Dimensions (W x D x H):
Weight:
Cambridge Audio, Gallery Court, Hankey Place, London SE1 4BB
©2007 Cambridge Audio Ltd. Issued June 2007
Cambridge Audio, and is equally at home playing music and
movies.
Not only is the 540R's on-board CS493263 multi-channel
DAC capable of decoding Dolby Digital Surround 6.1 EX and
DTS ES 6.1, but the receiver also processes Dolby Digital
and DTS 5.1, as well as Dolby Pro-Logic and Pro-Logic II.
Completing the package is an FM/MW tuner with 30 presets
and RDS functionality, along with a slim-line navigator style
Azur remote handset offering full control of the unit.
100 Watts RMS per channel, 8 ohms, two channels driven. 80 Watts
RMS per channel 8ohms, all 6 channels driven
FM/AM with RDS, 30 presets
Inputs: 6 Line Level + Tuner, 6.1 Direct Input
Outputs: 6 Amplified Speaker Outputs, 6.1 Preamp output, 1 Tape
record output
Inputs: 3 Co-Axial, 3 Optical
Outputs: 1 Co-Axial, 1 Optical
Inputs: 4 CVBS, 3 SVHS, 2 Component Video, 2 HDMI
Outputs: 1 CVBS, 1 SVHS,1 Component Video, 1 HDMI
CS42518 Multi-DAC, CS493263 DSP
20Hz – 20kHz +/- 1dB
<-60dB
<0.006% @ 1kHz, <0.012% @ 20Hz – 20kHz
850 Watts (Standby: 2 Watts)
430 x 310 x 100mm
9.5kg/20.9lbs
Cambridge Audio's policy is one of improvement.
Designs and specifications are therefore subject to
change without notice