Gad 29/29B; Figure 6-4 Gmu 11 Mounting Hardware - Garmin G5 Maintenance Manual

6.6 GAD 29/29B

CAUTION:
When removing and/or installing the GAD 29/29B, always ensure that aircraft power is off.
Unplug any auxiliary power supplies.
Removal
1. Gain access to the GAD 29/29B. Refer to the location information recorded in APPENDIX B of
this document and maintained with the aircraft records.
2. Disconnect the GAD 29/29B connectors.
3. Unscrew the 4 fasteners that hold the GAD 29/29B to the mounting location.
Reinstallation
1. Place the GAD 29/29B in its mounting location and align its holes with the mounting holes.
2. Insert the 4 mounting screws and secure the GAD 29/29B in place.
3. Inspect the electrical connectors and pins for signs of damage. Repair any damage.
4. Connect the wiring harness to the GAD 29/29B.
5. Conduct the system return to service procedure in Section 8.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Maintenance Manual

Figure 6-4 GMU 11 Mounting Hardware

Page 27 of 54
190-01112-11
Rev. 7