Sealey CP1209 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
1.1. GENERAL SAFETY
Follow all workshop safety rules, regulations and conditions when using the wrench.
9
Remove the battery pack from the wrench before servicing or performing any maintenance.
9
Maintain the wrench and battery pack in good condition. Check moving parts for alignment on a regular basis.
9
Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be
9
dangerous and will invalidate the warranty.
Ensure the wrench is 'locked' before installing the battery pack.
9
Keep the wrench, battery pack and charger clean for optimum performance.
9
Keep the work area clean and tidy and free from unrelated materials. Ensure that there is adequate lighting.
9
Ensure that battery pack is correctly inserted into the wrench handle and latched in place before operating wrench.
9
WARNING! When working around vehicle brake systems we recommend you wear suitable respiratory protection due to the possible
‰
presence of asbestos dust from brake linings.
Avoid unintentional starting.
9
Wear approved safety eye/face shield, ear defenders and hand protection.
9
Remove ill-fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear nonslip shoes.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT operate the wrench if any parts are missing as this may cause failure and/or personal injury.
8
DO NOT use the wrench unless you have been instructed in its use by a competent person.
8
DO NOT operate the wrench where there are solvent fumes or flammable gases, liquids or solids.
8
DO NOT leave the wrench operating unattended.
8
DO NOT carry wrench with your finger on the trigger.
8
DO NOT use the wrench for a task it is not designed to perform.
8
DO NOT operate the wrench when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT get the wrench or battery charger wet or use in damp or wet locations.
8
Keep wrench and charger in the case and store in a safe, dry, childproof area where the temperature will not exceed 40°C (104°F).
9
2. INTRODUCTION
Compact, lightweight cordless ratchet wrench, allows access to tight spaces. Variable speed
control trigger with lock function gives more control during application. Heavy-duty mechanical
steel ratchet head with forward and reverse control. Robust composite housing with soft,
comfortable grip. Integrated LED battery level indicator and LED work light. Requires 12V
battery and mains charger.
3. SPECIFICATION
Model No:................................................................. CP1209
Battery (not included): ............................................................
.................. 12V 1.5Ah Li-ion, 12V 3Ah Li-ion, 12V 4Ah Li-ion
No load speed: ........................................................0-200rpm
Drive: ........................................................................... 1/2sq.
Max. torque: .................................................... 80Nm (59lb.ft)
Noise power ................................................................. 90dB
Noise pressure ............................................................. 79dB
Vibration ............................................................... 7.373 m/s²
Uncertainty ............................................................... 1.5 m/s²
Replacement parts: ...................... CP1200MC mains charger
© Jack Sealey Limited
12V 1/2" DRIVE CORDLESS RATCHET WRENCH
80NM - BODY ONLY
MODEL NO:
Wear protective Wear ear
gloves protection
Original Language Version
CP1209
CP1209 Issue 1 30/04/20