Panasonic DNSK-P11 Setup Instructions page 8

How to use
Connection network using WPS mode (method 1)
Press the "WPS" button from the
1
router that will be connected to an air
conditioner.
• Check the status of Wireless LAN LED
on the remote control. If the Wireless
LAN LED is OFF, press the Wireless
LAN button to enable the Wireless
LAN connection.
Step 1
When the connection of air conditioner
3
to router is successful, the Wireless LAN
LED changed from blinking to ON.
Step 1
When the connec on of air-condi oner to router
is successful, the Wireless LAN LED changes from
blinking to ON.
*It may take up to few minutes before changes
to ON.
If the Wireless LAN LED is ON, tap "Next".
If Wireless LAN LED keep blinking, tap "Check"
8
ACXF55-27121_FC1219-1.indb 8
Connection Guide
Step 2 Step 3
Next
Cancel
Connection Guide
Step 2 Step 3
Next
Check
Cancel
Ensure Wireless LAN LED is ON. Press
2
and hold the Wireless LAN
for 5 seconds until "1" is shown on the
remote control and press
to the air conditioner.
Connection Guide
Step 1
Step 2
Cancel
If the Wireless LAN LED keep blinking,
4
check the wireless router connection.
Connection Guide
Step 1 Step 2
Searching for air-condi oner.
Please wait...
Cancel
button
pointing
SET
Step 3
SET
CANCEL
Next
Step 3
11/28/2019 10:41:06 AM