Sealey PTB181510 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this rollcab

and topchest.
Locate the rollcab and topchest in a suitable work area.

Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use the rollcab and topchest on level and solid ground, preferably concrete.

Keep rollcab and topchest clean and tidy in accordance with good workshop practice.

Keep children and unauthorised persons away from the work area.

DO NOT use this rollcab and topchest for any purpose other than that for which it is designed.

DO NOT place the rollcab and topchest in a damp or wet location or an area where there is condensation.

DO NOT clean the rollcab and topchest with any solvents which may damage the surfaces or the protective coating.

DO NOT move the rollcab and topchest with the drawers out. To avoid tipping, open one drawer at a time and close and secure all

drawers whilst moving.
DO NOT step on the drawers.

2. INTRODUCTION
• Heavy-duty welded steel construction for strength and durability.
• Textured powder coat finish which is solvent and rust resistant.
• Ball bearing drawer runners provide superior performance and carry heavier loads, double sets on large drawers.
• All drawers have full width sand blasted aluminium lift latch drawer pulls, making easy access while preventing inadvertent opening when box
is being moved.
• Heavy-duty Ø125mm Mag style castors, 4 swivel with toe brakes and 2 fixed on rollcabs.
• Heavy-duty exterior handles on chest and cabinets.
• Non-slip drawer liners supplied for all drawers.
• Topchests feature gas struts on lids for easy opening.
• Rollcabs (except for stainless steel versions) supplied with 12mm PVC coated MDF worktop (25mm on PTB183015) for use as a workbench
when not used with a topchest.
• Integral locking system locks all drawers in each unit with the turn of a key.
• All supplied with 2 keys.
• Manufactured to the highest levels of construction to withstand the toughest of workshop/garage conditions.
3. SPECIFICATION
Overall Size: (W x D x H)
Medium 1/2 Drawer (x2):
Large 1/2 Drawer (x4):
X-Large 1/2 Drawer (x2):
Medium Drawer (x1):
Large Drawer (x3):
Medium Drawer (x2):
Large Drawer (x1):
Medium Drawer (x3)
© Jack Sealey Limited
TOPCHEST - 10 DRAWER
ROLLCAB - 15 DRAWER
MODEL NO'S:
PTB181510, PTB183015
PTB183015 PTB181510
1845 x 510 x 1125mm 1830 x 500 x 565mm
395 x 425 x 58mm 395 x 425 x 58mm
395 x 425 x 135mm 395 x 425 x 135mm
395 x 425 x 285mm N/A
820 x 425 x 58mm N/A
820 x 425 x 135mm N/A
1280 x 425 x 58mm N/A
1280 x 425 x 135mm 825 x 425 x 135mm
N/A 825 x 425 x 58mm
Original Language Version
PTB181510
PTB183015
PTB181510, PTB183015 Issue: 1 25/11/20