Advertisement
Quick Links
ARTHREX
CONTINUOUS WAVE
®
For more information consult the User's Guide and the Directions for Use supplied
with the pump or tubing sets.
Arthrex, Inc.
1370 Creekside Blvd.
Naples, FL 34108-1945 USA
Toll Free: 1 (800) 934-4404
www.arthrex.com
Arthrex Tech Support:
+1-888-420-9393
4 SET-UP AND OPERATION
™
Arthrex GmbH
Erwin-Hielscher-Strasse 9
81249 München, Germany
Tel: +49 89 909005-0
www.arthrex.de
+49 89 90 90 05 8800
Advertisement
Related Manuals for Arthrex CONTINUOUS WAVE
Summary of Contents for Arthrex CONTINUOUS WAVE
- Page 1 ARTHREX CONTINUOUS WAVE 4 SET-UP AND OPERATION ® ™ For more information consult the User's Guide and the Directions for Use supplied with the pump or tubing sets. Arthrex, Inc. Arthrex GmbH 1370 Creekside Blvd. Erwin-Hielscher-Strasse 9 Naples, FL 34108-1945 USA 81249 München, Germany...
-
Page 2: Foot Control
ARTHROSCOPY PUMP ACCESSORIES Autoclavable Remote Foot Control Lavage Rinse Lavage: Timed increase of pressure for improved control of bleeding. Pressure Pressure Decrease Increase Rinse: Timed increase of flow for improved control of debris removal. (Only available when using DualWave outflow) Shaver Run/Stop Shaver Suction Toggle: Allows switching be-... - Page 3 INFLOW TUBING SET-UP Turn on the system, and wait until the self-diagnostic testing has finished before attaching the tubing. Remove the orange clip Insert the connector Unlock (a) and open Insert the green tubing Wrap the thicker into the pump pressure the inflow door (b) hub next to the green tubing between the...
- Page 4 INFLOW ONLY USER INTERFACE Inflow Only Stopped Fluid Used Set Pressure Boost Control Pressure Decrease Pressure Increase Menu Run/Stop Running Pressure Reading Flow Rate Run Time (Resets after power down) Run/Stop Lavage...
- Page 5 SYNERGY SHAVER DETECTION AND HEADS UP DISPLAY NOTE: Start with all units turned off (CW4, Synergy). Connect the red cable that comes with the Power on the Synergy CW4 to the rear of the Synergy Resection Resection Console Console Power on the CW4 *Connect to the Synergy imaging console for the heads up display *For the Synergy heads up display use the AR-3200-1040 accessory cable kit...
-
Page 7: Troubleshooting
3. Reduce outflow 4. Use high-flow cannulas For a full listing of warnings and instructions, please consult the Directions for Use and User Manual, packaged with the pump or pump tubing. These materials can also be found on Arthrex.com. - Page 8 This description of technique is provided as an educational tool and clinical aid to assist properly licensed medical professionals in the usage of specific Arthrex products. As part of this professional usage, the medical professional must use their professional judgment in making any final determinations in product usage and technique.
Need help?
Do you have a question about the CONTINUOUS WAVE and is the answer not in the manual?
Questions and answers