※When using the server in vertical installation:
Remove the stabilizers from the front of server, and insert the claws of stabilizer into the slots on the server.
Claws (2 places)
※
Maintenance of Exhaust air Filter
If the mesh of exhaust air filter is clogged with dusts, clean it according to the following procedure:
1.Remove the exhaust air filters A and B in reverse procedure of installation.
2.Remove dust from the mesh of exhaust air filter with vacuum cleaner or the like.
●Do not press the mesh strongly. It may cause damage to the filter.
3.Install the exhaust air filters A and B according to this document.
Front side
Align the stabilizer with slots on
the server.
36