Related Manuals for QSC Q-SYS CORE NANO
Summary of Contents for QSC Q-SYS CORE NANO
- Page 1 ™ Hardware User Manual CORE NANO - NETWORK I/O PROCESSOR CORE 8 FLEX - USB/FLEX CHANNELS TD-001615-00-A *TD-001543-01*...
-
Page 2: Important Safety Instructions
EXPLANATION OF TERMS AND SYMBOLS The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the warranty. -
Page 3: Maintenance And Repairs
QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs. -
Page 4: What's In The Box
What's in the Box (1x) (8x) (2x) (2x) Q-SYS Core 8 FLEX Flex GPIO RS232 Tx/Rx or Q-SYS Core NANO Channels (black) (black) (blue) Core 8 FLEX only Core 8 FLEX only (2x) (2x) (2x) (2x) Joining Rack Spacer Rack Ear... -
Page 5: Installation
Installation Ventilation Minimum open space of 6 inches measured from the back of the Q-SYS Core 8 FLEX or Core NANO. NOTE: In order to provide adequate dissipation of heat, keep the space directly to the rear of the Q-SYS Core 8 FLEX or Core NANO free of obstacles. - Page 6 TD-001615-00-A...
-
Page 7: Rack Mounting Options
Rack Mounting Options TD-001615-00-A... -
Page 8: Front Panels
Front Panels Power LED – illuminates blue when the Q-SYS Core 8 FLEX is ID Button – Locates the Q-SYS Core 8 FLEX in Q-SYS Designer powered on GUI and Configurator. Pressing the ID button for approximately 10 seconds invokes "Reset Network Settings" function. ID LED –... - Page 9 (100V – 240V, 50/60 Hz). USB Type C – USB 3.1, Host port or Device port (Device port functionally available when USB Type B not in use). (Note: Q-SYS Core 8 FLEX shown. Q-SYS Core NANO does not include FLEX channels or GPIO) TD-001615-00-A...
- Page 10 Serial Number – product serial number. Agency Declarations (Note: Q-SYS Core 8 FLEX and Core NANO share the same bottom attributes) Connections (Note: For GPIO connections and application examples, refer to "I/O-8 FLEX Technical Note - Using GPIO Inputs and Outputs" available at www.qsc.com.) TD-001615-00-A...
- Page 11 Dimensions (Note: Q-SYS Core 8 FLEX and Core NANO share the same dimensions) 220.0 mm 8.66 in 286.6 mm 11.28 in 220.0 mm 8.66 in POWER 43.6 mm CORE 8 FLEX 1.72 in USB/FLEX CHANNELS TD-001615-00-A...
-
Page 12: Specification
Specifications Specification Value FLEX Audio Inputs (Core 8 FLEX only) Input Frequency Response 20 Hz to 20 kHz @+24 dBU +0.05 dB/-0.5 dB Input THD+N @ 1 kHz @ +24 dBu sensitivity and +24 dBu input < 0.004 % @ -40 dBu sensitivity and -40.5 dBu input <0.009% Input to Input Crosstalk @1 kHz @+24 dBu sensitivity... - Page 13 Specification Value Sample Rate 48 kHz USB Audio Device Hosting Support for standard USB headset, speakerphone on USB type A connection (one device at a time) Input Sample Rate 48kHz or 16kHz, monaural Bit Resolution 8-bit, 16-bit, 24-bit or 32-bit floating point (IEEE 754) Format Little-endian, signed or unsigned Output...
- Page 14 FAX: +1.714.754.6173 © 2020 QSC, LLC. All rights reserved. QSC, the QSC logo, Q-SYS, and the Q-SYS logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. Q-LAN and, Q-SYS Designer are trademarks of QSC, LLC. Patents may apply or be pending.
Need help?
Do you have a question about the Q-SYS CORE NANO and is the answer not in the manual?
Questions and answers