Sealey APMS60 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear
Protective
Instruction
Manual Gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
storage system.
Locate in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use storage on level and solid ground, preferably concrete.
‰
Keep the storage system clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the storage system for any purpose other than that for which it is designed.
8
DO NOT use the storage system outdoors.
8
DO NOT place the storage system in a damp or wet location or an area where there is condensation.
8
DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the storage system when there are items placed inside.
8
DO NOT step on the shelves.
8
DO NOT overload the storage system.
8
2. INTRODUCTION
Modular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a
simple base cabinet or create a full workshop storage system.
Standard features include:
• Modular design to enable easy upgrading.
• Tough and durable construction with a hammered metal finish on the doors and drawers.
• Aluminium handles and drawer pulls.
• Ball bearing slides throughout.
• Choice of worktop - pressed wood or stainless steel.
• Gas struts on wall cabinet doors or simple tambour front.
• Floor cabinets feature adjustable shelves.
• All pieces are fully welded except Model No's APMS55, APMS56 and APMS60 Floor Cabinets which require simple assembly.
• Each unit supplied with a lock and two keys (except wall cabinets).
3. SPECIFICATION
Model No:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .APMS60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . APMS61
Overall Size (W x D x H) . . . . . . . . . . . . . . . . . . . . . .865 x 865 x 910mm . . . . . . . . . . . . . 865 x 865 x 350mm
© Jack Sealey Limited
INSTRUCTIONS FOR:
MODULAR CORNER FLOOR AND WALL
CABINETS 865mm
APMS60, APMS61
MODEL NO'S:
Original Language Version APMS60, APMS61 Issue: 1 - 18/10/16