Remove Keymat From A-Cover; Remove Receiver (Earpiece); Remove All The Screws - Nokia 1265 Disassembly/Assembly

Nokia Customer Care

3. Remove Keymat from A-cover

Unsnap the snaps (2 sets) between A-cover and Keymat, then separate Keymate
from A-cover. Be careful of keeping from damages of A-cover alignment pins and
Keymat mechanical.

4. Remove Receiver (Earpiece)

Remove Receiver by using the tweezers. Be careful not to damage the spring
contacts.

5. Remove all the screws

Use a non-conductive Torx #6 screwdriver to remove the six screws. Note the order
of removal in the order shown. The torque driver setting recommendation is 15+/-2
Ncm @ 450 +/- 50 rpm.
Issue 1 04/2007 © 2007 Nokia Corporation
Disassembly/Assembly
Company Confidential
1265(RH-103)
Page 7