Nokia Customer Care
Charging Operation
Battery
The 1265 uses a Lithium-Ion cell battery with a capacity of 860 mAh. QSC6010
reads the resistor inside the battery pack on the BSI line to identify the battery size.
Different charging algorithm will be used for different battery sizes. The resistors are
connected to the BSI pin inside the battery connector.
Charging Circuitry
The PM charge control is dependent on the charger type and the battery size.
External components are needed for electromagnetic compatibility (EMC), and
transient protection of the input to the baseband module. The charger's DC input is
through the dc-jack connector. This mobile terminal supports AC-3/AC-4 & DC-4
chargers.
Issue 1 04/2007
Figure 11: BL-4C battery pack pin order
Figure 12: Charging Circuitry
© 2007 Nokia Corporation
Baseband Description and Troubleshooting
Company Confidential
1265 (RH-103)
Page 15